LATHES Leblond 26” x 96”cc, 4 jaw chuck, SR, L1 spindle, 49-720rpm, HB 9,500.00 Leblond 20" x 60"cc, 3 jaw chuck,             3,250.00 Southbend 16” x 48”cc, Very clean, 4 jaw chuck 3,500.00 Warner & Swasey #2 Turret, S/N 560943 Lot #64 Complete 2,000.00 Warner & Swasey #3 Turret, 3 jaw chuck, Collets, Bar feed 3,250.00 Warner & Swasey #4 Turret, M2440, Collet Closer, M2240 s/n 1301488 3,500.00 Warner & Swasey #1A Turret, 3 jaw chuck, Tooling 2,500.00               SAWS Star RF916, 9x16 Capaticy, coolant 1500.00         FABRICATION EQUIPMENT Pearson 1/4"x10" HYD Shear, FOPB 18,500.00 Lennox 6’ x 25 ton Press Brake 4,500.00       PRESSES Greenard #3A Arbor Press with Stand 650.00 Dake #3 Broaching Press on Stand 1,000.00     DRILLS Rockwell Radial Arm type on cabinet base, Square Table, single phase 950 Royal Model 18, 18” floor type, Step pulley, Square table, #3MT 650.00 Delta 15” capacity, Pedestal type, 1/2 HP, 3 phase, #2MT 400.00 Delta 15” 2 head drill on large table base, Model 17-600, s/n 1488620 3/4hp 850.00 Buffalo Model 18, 3 phase, #3MT spindle, 2 HP 650.00 Edlund 25” Capacity Drill with large round Table 1,800.00 Avery Model #3, Geared Head, Power feed quill, 3 Phase, #3MT 2,500.00 Cleerman 25” Geared Head, 2 Axis Table, 4,000.00 Cincinnati Bickford 25” Geared Head, Powered quill, #4MT, Big table 5,250.00 Clausing Model 1655, s/n 526832, 1HP 3PH, 24” x 36”Production Table 850.00 Clausing(2) Model 1761, 15” Belt pulley, Large work table 550.00 Clausing Model 1687, s/n 106950,15” Step Pulley, SP, 10” x 14” tilt table 850.00 Rockwell Model 70-400, s/n 13R3022, 17” Pedistal, 18” x 22” table, 1 1/2HP 3PH 500.00 Rockwell Model 40-9747, 15” Pedistal, #2MT, 1HP 3PH 220/440, 12” x 17” table 400.00   MILLING MACHINES Bridgeport 9” x 42” table, 1 HP, Power Feed 2,750.00 Bridgeport Shaper - Slotter Attachment 1,895.00