Eastern Tool, INC

Eastern Tool Precision Lathes

YCL Series

E1860G-3 Lathe

		Swing over bed: 18"
		Swing over the cross slide: 11"
		Distance between Centers: : 60"
		Swing in the gap: 25"
		Spindle Nose Cam Lock: D1-8".
		The bed ways made of meehanite(M) cast iron.
		Hole through spindle: 3 1/8"
		Spindle taper: #6MT
		Spindle speeds: (12) 14-1600 RPM
		Longitudinal Feeds: 0.0015-0.0772
		Metric Threads: (53) 0.4mm-14mm
		Inch Threads: (40) 2-56
		Cross Feeds: 0.0006-0.0303
		Cross Slide travel: 10"
		Compound Rest Travel: 4"
		Tail Stock Diameter: 4"
		Tail stock (quill) travel and taper: 4.7" -- #4MT
		Motor: 7.5HP - 220/440 Volts, 3 Phase
		Net weight: 5,500 lbs
		Hardened and ground headstock gears& bedways.
		Fine grain high tensile castings, precision ground and hardened spindle and gears, cam lock spindle nose, induction hardened and precision ways, gap bed, gearbox coolant system, full length splash guard, 7.5 horsepower motor, 12 speeds, 4 way tool post, foot brake, graduated tail stock, single lever feed control, thread dial, inch/metric threading, steady rest, follow rest, face plate, 3 jaw universal chuck, 4 jaw independent chuck, work light, tools and manual.

		Swing Over Bed 14"
		Between Centers 40"
		Width of Bed: 8"
		Hardened and ground bedways and splined shafts in headstock.
		16 speeds all geared headstock from 45 to 1800 RPM
		3HP three phase 220 v motor
		Foot brake giving rapid brake and built in coolant system.
		Emergency stop button equippped on the front of headstock.
		Jog button for easy engagement and including spindle.
		Extra safety switch shuts down machine entirely for changing belt or gear for threading cutting.
		Open type chip pan easily to remove chips.


		Between Center: 40"/60"/80"/120"
		Swing over bed : 18"
		Width of bed: 16"
		10HP main motor, 220V/440V 3Ø
		49 kinds of inch threads.
		16 speeds from 16-1600 RPM
		D1-8 CAMLOCK WITH 3-3/16"spindle bore.
		Handwheel can be desengaged rapidly.
		Main spindle hardened and precision ground.
		Bed cast of fine grain high tensile cast iron.
		Bedways induction hardened& precision ground.
		All gears and shafts hardened and precision ground.
		4-way rapid traverse to longitudinal and cross
		Automatic lubrication system in headstock and feed box.
		Main spindle supported at 3-points by precision bearings.
		Full length foot brake, quick and reliable.


		Swing over bed 22"/26"
		Between centers: 40"/60"/80"/120"
		Width of bed 16"
		10 HP main motor 220V/440V 3Ø
		49 kinds of inch threads.
		16 speeds form 16-1600 RPM.
		D1-8 camlock with 3 3/16" spindle bore.
		Handwheel can be desengaged rapidly.
		Main spindle hardened precision ground.
		Bed made of fine grain high tensilbe cast iron.
		Bedways induction hardened& precison ground.
		All gears and shafts hardened and precision ground.
		4-ways rapid traverse to carriage & cross slide.
		Automatic lubrication system in headstock & feed box.
		Main spidle supported at 3-points by precision bearings.
		Full length foot brake, quick and reliable in action.


		Swing over bed 26"/32"/40"
		Between centers: 40"/60"/80"/120"/160"/200"
		Width of bed 21 21/32"
		20 HP main motor(15 HP ON DL-26 series only).
		67 kinds of inch threads.
		18 speeds from 7.5 to 1000 RPM
		D1-11 camlock with 5" spindle bore.
		Main spindle hardened Z& precision ground.
		Bed made of fine grain high tensible cast iron.
		4-way rapid travers to carriage & cross slide.
		Bed ways induction hardened & precision ground.
		All gears and shafts hardened & precision ground.
		Spindle supported at 3-point by precision bearings..
		Automatic lubricaiton system in headstock & feed box.
		Hydr-control multi-disc clutch for spindle turining & brake.


		Swing over bed 13"
		Between centers 40".
		D1-4 with 1 9/16" Spindle bore.
		Spindle speed 16 steps, 42-2000RPM
		Width of bed: 8"
		Headstock gears are hardened and ground.
		Headstock gears are made of SCM 21. (Cr-mo alloy steel) Respectively.
		3HP 3Ø main motor. Wire 220V,1Ø motor available.
		Stand with chip tray 7 break.
		The bed ways made mechanite cast iron.
		Made in Taiwan


		Swing over bed 14"
		Between centers 40"
		D1-4 with 1 9/16" spindle bore.
		width of bed 10"
		Spindle speed 16 steps, from 42-2000 RPM
		Headstock gears are hardened and ground .
		Headstock gears are made of SCM21. (Cr-mo alloy steel ) respectively.
		3HP 3Ø main motor, 220V, 1Ø motor available.
		One piece cast iron stand with foot break.
		Made in Taiwan

		Swing over bed 16"
		Between centers 40"/60"
		D1-6 with 2 1/8 " spindle bore
		Width of bed 11"
		Spindle speed 12 steps, from 50-1800 RPM
		Hardened and ground headstock gears and bedways.
		Hardened and ground saddle way and topslide way.
		One shot lube for Apron and carriage.
		Automatic lube for headstock gears and bearings.
		5 HP main motor
		One piece cast iron stand with foot brake.
		Bedways mad of meehanite cast iron.
		3 point bearings-two taper rdler/ one ball bearing.
		Universal gear box without change gear, gears made of alloy steel, All hardened.
		Made in Taiwan

		Swing over bed: 16"
		Between centers 40/60"
		D1-6 with 2 " spindle bore.
		Width of bed 10 3/16".
		The bed ways made of meehanite(M) cast iron.
		Hardened and ground headstock gears& bedways.
		Hardened and ground saddleway and top slide way.
		Spindle taper bearing #30214, #30215
		The spindle speed, 12 steps from 26 to 2000 RPM.
		Directional feed of the carriage is controlled by a handy push/pull knob on the Apron. 5HP main motor wire 220V,3Ø
		One piece cast iron stand with rapid barke.
		Universal gear box without change gear, gears made of alloy steel hardened.
		Made in Taiwan