Eastern Tool, INC

Eastern Iron Workers

MODEL 45-14 Iron Worker Machine

Punch Station
- Square notcher
- Coper notcher
- Pipe notcher
- Brake: 6"

Power Cavity
- Square notcher
- Coper notcher
- Brake: 6" or 9"
- Angle shear
- Channel shear
- Rod shear
(round or square)
- Z & T shear

	Features
		- Manual punch aligner (Models 45-14 and N42-14)
		- 6" open throat punch has 42-ton capacity
		- 14" bar shear with 4-sided blades
		- Bar shear holddown can be fixed or adjustable
		- Variable stroke control
		- Built for forklift handling
		- Magnetic starter for safety and reliability
		- Built-in square notcher (Model N45-14)

	Accessories
		- Punch nut wrench for L series punch nut
		- Punch rack holds 20 sets of L series punches
		- Punch table with adjustable jig for high production with accuracy
		- Bar shear stop for production shearing up to 24" lengths
		- Bar shear table extends the table from 3" to 12"
		- Grease bank allows lubricating without removing machine covers
		- Bin for collecting steel dropping from bar shear
		- Oversize die stand for punching over 1-3/8" round (specify type and thickness of material to be punched)
		- Offset die stand for punching close to the web on angle iron
		- Oversize stripper for punching over 1-3/8" round

MODEL 56-14 Iron Worker Machine 4 Station Machine

Punch Station
- Square notcher
- Coper notcher
- Pipe notcher
- Brake: 6" only

Power Cavity
- Brake: 6" or 9"
- Angle shear
- Channel shear
- Rod shear
(round or square)
- Z & T shear

	Features
		- Open throat punch has 56-ton capacity
		-14" bar shear with 4-sided blades
		- Bar shear holddown can be fixed or adjustable
		- Magnetic starter for safety and reliability
		- Variable stroke control
		- Built for forklift handling
		- Full up and down stroke control
		- Manual punch aligner

	Accessories
		- Punch nut wrench for L series punch nut
		- Punch rack holds 20 sets of L series punches
		- Punch table with adjustable jig for high production with accuracy
		- Bar shear stop for production shearing up to 24" lengths
		- Bar shear table extends the table from 3" to 12"
		- Grease bank allows lubricating without removing machine covers
		- Bin for collecting steel dropping from bar shear
		- Oversize die stand for punching over 1-3/8" round (specify type and thickness of material to be punched)
		- Offset die stand for punching close to the web on angle iron (specify size of angle and largest hole diameter to be punched. Also specify how close to the web the hole will be located, measured from the inside.)
		- Remote hydraulic foot control

MODEL PRO 56 Ton Iron Worker Machine 4 Station Machine

Punch Station
- Square notcher
- Coper notcher
- Pipe notcher
- Brake: 6"

Power Cavity
- Brake: 6" or 9"
- Angle shear
- Channel shear
- Rod shear
(round or square)
- Z & T shear

	Features
		- Open throat punch has 56-ton capacity
		- 14" bar shear with 4-sided blades
		- Bar shear holddown can be fixed or adjustable
		- Magnetic starter for safety and reliability
		- Built for forklift handling
		- Built for forklift handling
		- Full up and down stroke control
		- 4^th station allow notching without retooling
		- Notcher of choice comes standard with machine

	Accessories
		- Punch nut wrench for L series punch nut
		- Punch rack holds 20 sets of L series punches
		- Punch table has adjustable jig for high production with accuracy
		- Bar shear stop for production shearing up to 24" lengths
		- Bar shear table extends the table from 3" to 12"
		- Slug type angle shear
		- Manual punch aligner
		- Grease bank allows lubricating without removing machine covers
		- Bin for collecting steel dropping from bar shear
		- Oversize die stand for punching over 1-3/8" round (specify type and thickness of material to be punched)
		- Oversize stripper for punching over 1-3/8" round
		- Oversize die stand for punching close tot he web on angle iron
		- Remote foot control

MODEL 66-24 Iron Worker Machine

Punch Station
- Square notcher
- Coper notcher
- Pipe notcher
- Brake: 6, 9, 8, 24"

Power Cavity
- Brake: 6" or 9"
- Angle shear
- Channel shear
- Rod shear
(round or square)
- Z & T shear

	Features
		- Open throat punch has 66-ton capacity
		-24" bar shear with 4-sided blades can mitre angle iron to 3" x3 x 5/16"
		- Bar shear holddown can be fixed or adjustable
		- Magnetic starter for safety and reliability
		- Variable stroke control
		- Built for forklift handling
		- Electric foot control
		- Bar shear table
		- Manual punch aligner
		- Slug type angle shear 5"x5:x 3/8" or 6"x6" x3/8"; can mitre angle iron 5"x4"x3/8"

	Accessories
		- Punch nut wrench for L series or 150 and 500 series punch nut
		- Bar shear stop for production shearing up to 24" lengths
		- Deluxe back gauge for production shearing up to 6' leng.
		- Punch table w/ adjustible jig for high production & accuracy
		- Grease bank allows lubricating without removing covers
		- Punch rack holds 30 sets of punches and dies
		- Steel bin catcher
		- Oversize die stand for punching over 2 1/4" round (specify type and thickness of material to be punched)
		- Oversize stripper for punching over 2 1/4" round
		- Offset die stand for punching close the web on angle iron (specify size of angle, largest diameter hole to be punched, and - measuring from the inside - how close to the web the hole is located.

ACCESSORIES for Iron Worker Machines